Flat Roof Replacement in Morecambe.
This customer had a leaking flat roof over his kitchen.
We installed a warm rubber roof system.
We removed the existing roof to reveal the roof joist, there was severe damp to the plywood sheets and wood rot in the corner section of the roof. We removed the timber and replaced with 6x2 treated timber.
We then installed plysheet to roof decking and built a frame on the outside area of decking. we then layed a vapour barrier and installed insulation board.
We then layed out the osb T&G boards and fixed in position with 6 inch decking screws.
We then installed new Upvc fascia's.
We layed out the rubber roof membrane and allowed to relax for half a hour. we glued the rubber roof to the osb board and used solvent glue around the edges.
We then fixed the trims around the edges to finish the rubber roof system off nicely.
